Proprietary Danzer Vertical Slicer Continues Into Next Generation

Proprietary Danzer Vertical Slicer Continues Into Next Generation

TECHNOLOGICAL DEVELOPMENT OF THE DANZER VERTICAL SLICER VS4000

Dornbirn, Austria. The internationally operating hardwood specialist Danzer kicks off the next generation of its proprietary vertical slicer Danzer VS4000. After being in use at Danzer veneer plants all over the world for over 15 years, the proven veneer slicer will undergo an extensive upgrade. Controls and user interfaces will be updated. The Danzer VS4000 is responsible for the economical and resource-saving production in the veneer plants.

The Danzer Vertical Slicer, short VS4000, has been developed by Danzer more than 15 years ago. The proprietary veneer slicer is being used in all Danzer veneer plants worldwide for slicing both veneer in standard thicknesses of 0.5 mm as well as deck layers of 3.5 mm thickness. Slicing deck layers for flooring instead of the conventional sawing is a resource-efficient and economical way of production. The loss of valuable wood during the slicing process is substantially lower than with the sawing method, which results in an average 30 to 40 percent loss of material in form of sawdust.

Slicing veneer and deck layers with above-average thickness

“With the Danzer VS4000 it is possible to slice not only in the standard production range of approximately 0.5 mm thick veneer but also significantly thicker veneer. This is what differentiates the Danzer VS4000 from other manufacturers’ machines,” explains Andreas Wagner, Danzer’s Vice President Engineering, who is in charge to develop the next generation of the machine. “One of the reasons for our success is the high precision in slicing all veneer thicknesses and specifically flooring deck layers. Being in use on a daily basis for more than 15 years, the excellent quality of our machine has been proven. Therefore, the focus of the further development lies mainly on details and optimizations on a very high level. We are upgrading the controls and user interfaces to achieve even higher efficiency, easier maintenance and improved error diagnostics.”

Development and project schedule

Andreas Wagner, Danzer Vice President Engineering, will be working with two engineers from Danzer locations in Europe and North America on the next generation, which is planned to take place within the following months at the Danzer location in Melnik, Czech Republic. Extensive preliminary examinations are currently being carried out in order to further improve the slicing quality by optimizing both knife and pressure bar. Involved in the development process are all Danzer veneer plant managers. “The respective plant managers collect the experiences, problems and suggestions for solutions of the past few years, in order to gradually work on the optimization of the existing machines. The goal is to upgrade the Danzer VS4000 machines in all veneer plants step by step”, concludes Andreas Wagner.

MJB Wood Group Aligns Goals at Annual Meeting

The MJB leadership team is spending time in Golden, CO meeting with board members and owners from the Coors Family. This meeting allows our team to get together and converse about industry and company projections, technology, marketing, and future plans for MJB, as well as spend time connecting with VPs and Directors from other segments of the company, ensuring synergy through 2022 and beyond.

Read More →

Plaudits for CPA Spring Meeting

The Composite Panel Association’s recent spring meeting received high marks from the roughly 300 attendees representing nearly 110 companies who traveled to Orange County, California, following two years of virtual sessions.

Read More →

Closets Expo Opens Doors

The laminated panel and surfaces industry was well represented at the annual Closets Conference & Expo, held April 27-29 at the San Diego Convention Center, San Diego, California.

Read More →

Ideas and strategies for outdoor living professionals